On Tue, Jun 5, 2012 at 2:00 PM, Henning Hraban Ramm hra...@fiee.net wrote:
Sorry for coming back again and again, but I’m still stuck, and my deadline
is overdue.
* I need full-page pictures on defined pages in the middle of a chapter.
* I don’t care if I must define on page x or on the next
can’t get layers working within
postponing.
And when that works, I need to wrap it in a macro, since I alway need
to define and postpone three sequential pages.
Without postponing, this works:
--- *** ---
\setuppagenumbering[alternative=doublesided]
\definelayer[bg][x=0mm,y=-3mm,width=\dimexpr
This should do the trick:
\define[1]\PagenumberCommand
{\smash[d]{#1}}
\setuppagenumbering
[ strut=no,
command=\PagenumberCommand]
And how well it does it!
Now I managed to align the last line of the grid with the textblock's frame:
---
\definemeasure
[gridWidth]
[\dimexpr
Am 05.06.2012 um 14:00 schrieb Henning Hraban Ramm:
Sorry for coming back again and again, but I’m still stuck, and my deadline
is overdue.
* I need full-page pictures on defined pages in the middle of a chapter.
* I don’t care if I must define on page x or on the next right page after
Am 2012-06-05 um 19:55 schrieb Wolfgang Schuster:
Sorry for coming back again and again, but I’m still stuck, and my
deadline is overdue.
* I need full-page pictures on defined pages in the middle of a
chapter.
* I don’t care if I must define on page x or on the next right
page after
interface (layer?) could do the same. Any comment or improvement is
welcome.
\newdimen\overfigwd
\newdimen\overfight
% Put the figure and define the x/y percentage factor for the calspairs.
\def\startoverfig
{\dodoubleempty\dostartoverfig}
\def\dostartoverfig[#1][#2]%
{\bgroup
, but maybe a higher level
interface (layer?) could do the same. Any comment or improvement is
i'd go for layers
welcome.
\newdimen\overfigwd
\newdimen\overfight
% Put the figure and define the x/y percentage factor for the calspairs.
\def\startoverfig
{\dodoubleempty\dostartoverfig
article in TB will explain the details of the process and also a careful
mathematical annalysis of how we reached the right value with a high
precission. The actual implementation is the most boring part.
\starttext
\startTEXpage[offset=1ts]
Hello World!
\the\dimexpr 1ts
\the\dimexpr
.
\definepageshift
[flyer]
[horizontal]
[\dimexpr\measure{bleed}-\measured{shortfold}\relax,
\measure{bleed},
\measure{bleed},
\dimexpr2\measured{shortfold}+\measured{bleed}\relax,
\measure{bleed},
\dimexpr\measure{bleed}-\measured{shortfold}\relax
title would be useful.
\unprotect
\define[3]\SectionToCEntry{%
\hbox \strc_lists_get_reference_attribute\v!all{%
\par \leftaligned\bgroup
\hbox to 2em{#3}%
\hskip 1em
\vtop{\hsize\dimexpr\textwidth-3em\relax#2}
\egroup \par%
}
}
\protect
\setuplist
\define[1]\divisionrule
{\dontleavehmode\blap
{\vskip-\strutht
\blackrule[width=\the\dimexpr.5em*#1\relax,height=2\linewidth]}%
\vskip-\lineheight}
Ahh! Yes, this helps a lot.
Thank you very much!
Wolfgang
Dear Hans,
Thanks for the solution.
It works perfectly.
Best regards,
Dalyoung
>> define[1]\iCol
> {\starttabulate[|*{#1}{|lw(\dimexpr.84\makeupwidth/#1\relax)|}]}
>
___
If your question is of intere
is the most boring part.
>
> \starttext
>
> \startTEXpage[offset=1ts]
> Hello World!
>
> \the\dimexpr 1ts
>
> \the\dimexpr 1es
>
> \the\dimexpr 1eu
>
> \eufactor20
>
> \the\dimexpr 1eu
> \stopTEXpage
>
> \stoptext
>
Me again...
I'd like to define an address layer in my environment:
--- start env --
\definelayer[senderlayer]
[x=0mm, y=0mm, width=\paperwidth, height=\paperheight]
\def\Sender#1#2#3{\setvalue{SenderKey#1}{#2}\setvalue{SenderVal#1}{#3}}
\def\GetSenderLine#1{\bTR\bTD\doiftextelse
and earlier versions, so it does not appear to be a regression.)
\showframe
\setuppapersize[A4][A3,landscape]
\useMPlibrary[dum]
%% Enable the first set of three for wider picture margins,
%% and the second set of three for standard picture margins
\def\FullWidth{\the\dimexpr
Fabrice Couvreur mailto:fabrice1.couvr...@gmail.com
10. August 2015 09:13
Dear Hans,
I tested without understanding what \unexpanded, and of course it works!
You can use ConTeXt’s \define command where you don’t have to think
about \unexpanded etc., e.g.
\define[2]\ChapterCommand
{\setbox
nepageshift
> [flyer]
> [horizontal]
> [\dimexpr\measure{bleed}-\measured{shortfold}\relax,
> \measure{bleed},
> \measure{bleed},
> \dimexpr2\measured{shortfold}+\measured{bleed}\relax,
> \measure{bleed},
> \dimexpr\measure{bleed}-\measured{s
.
\setuparranging
[TRYPTICHON]
%% Because of the shorter folded page and the bleed the pages has
%% to be shifted horizontally on the printed sheet.
%% The values are calculated here.
\definepageshift
[flyer]
[horizontal]
[\dimexpr\measure{bleed}-\measured{shortfold}\relax
Hi all,
Some times ago, Taco helps me to define a custom itemize:
\setbox0=\hbox{--~}
\def\indenteddash#1{\hskip\parindent--~}
\definesymbol[indentdash][\indenteddash]
\setupitemize[each][indentdash,packed,joinedup,intext][indentnext=yes,width=\dimexpr
\parindent + \wd0 \relax]
The result
Renaud AUBIN wrote:
Hi all,
Some times ago, Taco helps me to define a custom itemize:
\setbox0=\hbox{--~}
\def\indenteddash#1{\hskip\parindent--~}
\definesymbol[indentdash][\indenteddash]
\setupitemize[each][indentdash,packed,joinedup,intext][indentnext=yes,width=\dimexpr
TOCpar]
[3]
[width=\dimexpr\TOCPageLabelWidth,
align=middle]
Finally, wrap it all up in the macro
\define[3]\TOCEntry{%
\startTOC
#1 \TOCpar #2 \TOCpar #3%
\stopTOC%
}
and indicate the command to use in the setup
\setuplist
[c
. Also, I am assuming that the colon is simply part of the name
assigned to this setup and has no other significance: is this right?
3. So, my guess (once problem 1 is fixed), is that I will define
*two* layers (one for right pages and one for left pages), and do a
\setupbackground [rightpage
size, on the right side.
The \mychap seems to work while used directly.
Any solution?
\define[2]\mychap
{\framed
[frame=off,width=broad,align=flushleft,bottomframe=on,offset=0pt]
{\setbox\scratchbox\hbox{#1}%
\vtop{\hsize\dimexpr\hsize-\wd\scratchbox\relax#2
=.4\textwidth}
\startplacefigure[location={#1},title={#1 \fakewords{3}{20}}]
\externalfigure[place #1][width=\PicWidth,height=\dimexpr\textheight * \imgH /
10 \relax]
\stopplacefigure
}
Put the value of the random location in a macro.
\define[1]\Blindbild
{\edef\PicLocation{#1
[option=bookmark]
\define[3]\SectionListEntry
{\par \leftaligned\bgroup
\hbox to 2em{#3}%
\hskip 1em
\vtop{\hsize\dimexpr\textwidth-3em\relax#2}
\egroup \par}
% Comment out this next line to regain section hyperlinks in the ToC
\setuplist[section][alternative
the example work?
\usemodule[annotation]
\define[2]\FullwidthCommand
{\doifoddpageelse
{\doadaptrightskip{-\the\dimexpr\rightmarginwidth+\rightmargindistance\relax}}
{\doadaptleftskip {-\the\dimexpr\leftmarginwidth +\leftmargindistance
\relax}}%
#2}
\defineannotation[fullwidth
Hi again,
I’m always struggling with putting stuff on layers, since these just
never start where I’d expect them to, and the offsets changed a few
times within the last years.
Please explain how I should define a layer that covers the whole page,
since the following MWE is wrong (the layer
On 4/15/22 21:51, Henning Hraban Ramm via ntg-context wrote:
> Hi again,
>
> I’m always struggling with putting stuff on layers, since these just
> never start where I’d expect them to, and the offsets changed a few
> times within the last years.
>
> Please explain how I
Hi Hraban,
I can't answer your question counter or \define.
However in my specific situation I would not use the number as a counter but
just as a value. Actually my situation is an exam in which the total points are
44. From these I want to calculate percentages. And, as I find it easier
?
\define[2]\mychap
{\framed
[frame=off,width=broad,align=flushleft,bottomframe=on,offset=0pt]
{\setbox\scratchbox\hbox{#1}%
\vtop{\hsize\dimexpr\hsize-\wd\scratchbox\relax#2}%
\box\scratchbox}}
\setuphead[chapter][command=\mychap,textstyle=\tfa,numberstyle=\tfd]
\starttext
error?
If the figure width is slightly decreased (see the commented part),
the first page looks as intended. But that's exactly what the
command \definecolumnsethsize is for -- to get the correct size.
Another workaround is to define the column width, so it is a know
value.
The behaviour
installation):
\setuplayout[grid=yes]\showgrid
\setupbodyfont[14pt]
\usemodule[annotation]
\define[2]\ZitatCommand
{\topskip\dimexpr\topskip+\lineheight/2\relax
\startnarrower
“#2”%
\stopnarrower}
\defineannotation
[zitat]
[alternative=command,
command=\ZitatCommand,
spacebefore
Not sure if there are side effects but this works (requires mkiv and a recent
installation):
\setuplayout[grid=yes]\showgrid
\setupbodyfont[14pt]
\usemodule[annotation]
\define[2]\ZitatCommand
{\topskip\dimexpr\topskip+\lineheight/2\relax
\startnarrower
“#2”%
\stopnarrower
,]
\setupcombinedlist[content][interaction=all,]
\unprotect
\define[3]\SectionToCEntry{%
\hbox \strc_lists_get_reference_attribute\v!all{%
\par \leftaligned\bgroup
\hbox to 2em{#3}%
\hskip 1em
\vtop{\hsize\dimexpr\textwidth-3em\relax#2}
\egroup \par%
}
}
\protect
The following example is taken from the wiki
(http://wiki.contextgarden.net/Command/setuplist):
\define[3]\SectionToCEntry{
\leftaligned\bgroup
\hbox to 2em{#3}%
\hskip 1em
\vtop{\hsize\dimexpr\textwidth-3em\relax#2}%
\egroup
}
\setuplist
[part]
[alternative=interactive
Am 07.11.2014 um 15:04 schrieb Michał Goliński golin...@amu.edu.pl:
The following example is taken from the wiki
(http://wiki.contextgarden.net/Command/setuplist):
\define[3]\SectionToCEntry{
\leftaligned\bgroup
\hbox to 2em{#3}%
\hskip 1em
\vtop{\hsize\dimexpr\textwidth
Henning Hraban Ramm schrieb am 28.09.2019 um 08:53:
Am 2019-09-27 um 14:58 schrieb Wolfgang Schuster
:
\define\question{44}
\defineexpandable\question{44}
Would it make sense to use a counter or some other TeX construct?
Is it better to use \setvariable(s) for simple values than any \def
> Am 2019-09-27 um 14:58 schrieb Wolfgang Schuster
> :
>
>> \define\question{44}
> \defineexpandable\question{44}
Would it make sense to use a counter or some other TeX construct?
Is it better to use \setvariable(s) for simple values than any \def?
Should I use a \newdime
When I customise the table of contents layout I lose the automatic hyperlinks.
Is there a simple configuration option that I have missed or do I need to
create my own links somehow?
Example:
\setupinteraction[state=start]
\setupinteractionscreen[option=bookmark]
\define[3]\SectionListEntry
etupinteraction[state=start]
> \setupinteractionscreen[option=bookmark]
>
> \define[3]\SectionListEntry
> {\par \leftaligned\bgroup
> \hbox to 2em{#3}%
> \hskip 1em
> \vtop{\hsize\dimexpr\textwidth-3em\relax#2}
> \egroup \par}
>
> % Comment o
I need to create my own links somehow?
>>
>> Example:
>>
>> \setupinteraction[state=start]
>> \setupinteractionscreen[option=bookmark]
>>
>> \define[3]\SectionListEntry
>> {\par \leftaligned\bgroup
>> \hbox to 2em{#3}%
>>
on the left side and the number, with higher size, on
the right side.
The \mychap seems to work while used directly.
Any solution?
\define[2]\mychap
{\framed
[frame=off,width=broad,align=flushleft,bottomframe=on,offset=0pt]
{\setbox\scratchbox\hbox{#1}%
\vtop{\hsize
\input tufte
\stopfullwidth
\input tufte
\stoptext
My questions are: Is there no more \startlocal, how to locally adjust the
layout on a page and how to make the example work?
\usemodule[annotation]
\define[2]\FullwidthCommand
{\doifoddpageelse
{\doadaptrightskip{-\the\dimexpr
, but maybe nowadays one could also right a more readable lua code to
achieve the same.
Best regards: Otared K.
\define\thinrulesfillpage%
{
\hphantom{Answer} % this is necessary, I don't know why...
\blank
\scratchcounter\dimexpr(\pagegoal-\pagetotal-2\lineheight
uot;inject" TeX workflow or whether to
access LuaTeX internals (nodes?) to get the desired information.
- Is it possible somehow?
Too easy ...
\startluacode
function document.whatever()
context(nodes.hpack(tex.getnest().head.next).width)
end
\stopluacode
\unex
relax,
width=\ColWidth,
align=flushleft,
]{%
\inframed[
width=\ColWidth,
align=right,
frame=off,
offset=overlay,
strut=yes,
]{#1}%
}%
}
\define\PlaceFootnote{%
\inmargin[
voffset=\dimexpr-\FNVOffset\lineheight\relax,
width=\ColWidth,
]{%
\vtop{\placelocalnotes
ng stuff on layers, since these just never
> start where I’d expect them to, and the offsets changed a few times within
> the last years.
>
> Please explain how I should define a layer that covers the whole page, since
> the following MWE is wrong (the layer always starts below the f
way to define them in one definition?
It may be my greedy hope.
\define[1]\iCol
{\starttabulate[|*{#1}{|lw(\dimexpr.84\makeupwidth/#1\relax)|}]}
-
Hans Hagen | PRAGMA ADE
?
no, unrelated, try this:
\setuphead
[section]
[after={\strut\blank[-2*line,samepage,disable]},
command=\SectionCommand,
distance=0pt]
\define[2]\SectionCommand{\inleft{XX}}
That was fine until it ran into \setupwhitespace with a non-zero value.
Fiddling with the after key \blank
Hi Lutz,
the tfm's and map file I used in my typescript are part of the lucida
package from TUG.
Wolfgang
Am 23.04.2009 um 11:51 schrieb Lutz Haseloff:
Thanks Wolfgang,
but I got following error:
define font | font with name hlcrim is not found
math virtual | loading font lucidamath
]
% A macro that generates three shades above and below the given color.
% It is assumed here that the RGB values are also passed along with
% the color name.
\define[4]\generateColorGroup{
\definecolorgroup
[#1]
[#2:#3:#4]
%\dimexpr#2/4:#3/4:#4/4]
}%
\generateColorGroup{maroon}{0.8}{0.2
\structurelistuservariable{author}}}%
\hfill\currentlistentrypagenumber % pagenumber
\egroup
\egroup}
\define[3]\TitleListCommand
{\hbox\bgroup
\hbox to 3cm{\currentlistsymbol\hss}% number + labeltext
\vtop\bgroup
\hsize\dimexpr\makeupwidth-3cm\relax
On Thu, Sep 30 2010, Patrick Gundlach wrote:
I still have some problems with TABLE:
\bTABLE[frame=on]
We need to know the values for rulethickness and offset, so let's define them:
\bTABLE[frame=on, rulethickness=0.5pt, offset=0.1em]
\bTD[frame=off,rightframe=on,rulethickness=1mm] abc
...@gmail.com
10. August 2015 09:13
Dear Hans,
I tested without understanding what \unexpanded, and of course it works !
You can use ConTeXt’s \define command where you don’t have to think about
\unexpanded etc., e.g.
\define[2]\ChapterCommand
{\setbox\scratchbox\hbox to \leftmarginwidth{#1
based on the following, which I made it
following suggestions from others. There may well be other ways, but
this works for me.
\define\Poemindent{3em}
\define\Poeminset{14em}
\definedelimitedtext[Poe]
\setupwhitespace[medium]
\showframe
\startbuffer[Poem]
This is a long
mem
> > emememememem
> >
> > So there are two last line lengths extrems:
> > (shortest)
> > emememememememememememememememememememem
> > emememememem
> >
> > (longest)
> > emememememememememememememememememememem
> &g
- case (2)
I am afraid I hasn't been clear enough yet.
Can I somehow define command globally which takes local block widths?
\parfillskip #1 plus \localhsize-#1-#2, where
#1 gap width
#2 shortest line width
\availablehsize
So the following \parfillskip specification finally seems to be what I
ound]
[\directsetup{pagebackground}]
\setupbackgrounds
[page]
[background=pagebackground]
\startsetups pagebackground
\doifelsemode {chapterpage} {
\setlayer
[chapter]
[x=\dimexpr\backspace+\textwidth+\rightmargindistance\relax,
y=3in,
loca
readable lua code to
achieve the same.
Best regards: Otared K.
\define\thinrulesfillpage%
{
\hphantom{Answer} % this is necessary, I don't know why...
\blank
\scratchcounter\dimexpr(\pagegoal-\pagetotal-2\lineheight)/(\dimexpr\lineheight+2.2ex\relax)\relax
arginNote#1{%
> \inmargin[
> voffset=\dimexpr-\FNVOffset\lineheight\relax,
> width=\ColWidth,
> align=flushleft,
> ]{%
> \inframed[
>width=\ColWidth,
>align=right,
>frame=off,
>offset=overlay,
>strut=yes,
>]{#1}%
> }%
> }
>
with putting stuff on layers, since these just never
start where I’d expect them to, and the offsets changed a few times within the
last years.
Please explain how I should define a layer that covers the whole page, since
the following MWE is wrong (the layer always starts below the first line
[0.5in]\startframedtext[background=color,backgroundcolor=gray:10]},
after={\stopframedtext\blank[0.25in]},
color=blue*:3]
and
\define[2]\MyframedsectionCommand
{\framed
[background=color,backgroundcolor=gray:10,align=flushleft]
{\hbox to 2cm{#1}\vtop{\hsize=\dimexpr\hsize-2cm\relax
]
and
\define[2]\MyframedsectionCommand
{\framed
[background=color,backgroundcolor=gray:10,align=flushleft]
{\hbox to 2cm{#1}\vtop{\hsize=\dimexpr\hsize-2cm\relax#2}}}
\definehead[myframedsection][section]
\setuphead
[myframedsection]
[before={\blank[0.5in]},
command
to work while used directly.
Any solution?
\define[2]\mychap
{\framed
[frame=off,width=broad,align=flushleft,bottomframe=on,offset=0pt]
{\setbox\scratchbox\hbox{#1}%
\vtop{\hsize\dimexpr\hsize-\wd\scratchbox\relax#2}%
\box\scratchbox}}
\setuphead[chapter][command
On 5/19/06, Johannes Graumann wrote:
Hello,
I define my margins like so:
% Papersize is 'letter'
\setuppapersize[letter][letter]
% CIT thesis regulations: 1 in margins, 1.5 in on the binding side
% Johannes: no footer
\setuplayout[
margin=1in,
backspace=1.5in,
footer=0in
the wiki
and the internet at large, but an inability to precisely word this
leaves it difficult to find any previous example of this.
Many thanks,
Andrew
\define[2]\ChapterCommand
{\line
{\leaders\hbox
{\vrule width 1pt height .5\strutht depth
-\dimexpr.5\strutht-\linewidth\relax
[title=beta] \stopchapter
\startsection[title=alphasec] \stopsection
\startchapter [title=gamma] \stopchapter
\startsection[title=alphasec] \stopsection
\stoptext
How do you determine whether or not the chapter title should be displayed?
\define[3]\SectionListEntry
{\par
={}
manually, but it doesn't work.
May it be even possible to let Context automatically determine if the
float is to be turned right or left, depending on its page?
By the way, is \definemeasure meant as a replacement for \newdimen and
\dimexpr? Are there caveats about switching to it?
Thanks and kind
ou can determine how much space is left on the page and with the
\getnoflines
command you get the number of lines for the free space.
begin example
\define\MoveToBottom
{\par
\dowithnextbox
{\scratchdimen\dimexpr\pagegoal-\pagetotal-\nextboxht-\lineheight\relax
\getno
orizontal][inner={\setupinterlinespace[line=6ex]}]
\startitem First \stopitem
\startitem Second \stopitem
\startitem Third \stopitem
\startitem Fourth \stopitem
\stopitemize
\stoptext
or add a invisible symbol with increased height/depth at the begin of
each item, e.g.
\define\HorizontalIte
()
context(locations[math.random(1,#locations)])
end
\stopluacode
\newdimen\PicWidth
\PicWidth=\textwidth
\define[1]\Blindbild{
\getrandomnumber\imgH{1}{9}
\PicWidth=\textwidth
\doif{#1}{left}{\PicWidth=.4\textwidth}
\doif{#1}{right}{\PicWidth=.4\textwidth}
\startplacefigure[location={#1},title={#1
=middle]
\define\fullwidth{\dimexpr(\leftmargindistance+\leftmarginwidth+\textwidth)}
\section{First}
\subsection{First first}
\input tufte
\setupnarrower[left=-9pc]
\startnarrower[left]
\startframedtext[frame=off,topframe=on,bottomframe=on,align=middle,width=\fullwidth]
The whole frame should
r=0pc,
> height=49pc,
> footer=0pc,
> bottomdistance=2.5pc,
> bottom=1pc,
> location=middle]
>
> \define\fullwidth{\dimexpr(\leftmargindistance+\leftmarginwidth+\textwidth)}
>
> \section{First}
> \subsection{First first}
>
> \input tufte
>
> \setupnarrower[left=
to the \ChapterListCommand do I need to make to accommodate
the following? Possibly an \else statement, but not sure how to include
that:
\startchapter [title={Chapter title}] [author={Author Name}]
I forgot to change the argument for the check off the author entry, this
should fix it.
\define[3
nothing to solve the
problem:
\define[3]\ChapterListCommand
{\hbox\bgroup
\hbox to 2.5cm{\currentlistsymbol\hss}% number + labeltext
\vtop\bgroup
\hsize\dimexpr\makeupwidth-2.5cm\relax
\doifsomething{\rawstructurelistuservariable{year
You probably know about combinations to place images side by side:
\startcombination[3*1]
{\externalfigure[cow]}{cow}
{\externalfigure[mill]}{mill}
{\externalfigure[hacker]}{hacker}
\stopcombination
Now, the widths aren’t calculated automatically.
You could define them on your own
[narcite][left=\repshift,before=,after=]
\define\startbloccite{\startnarcite[left]\setupindenting[first,yes,\dimexpr\parindent-\repshift]\startlinenumbering[repcite]«}
\define\startbloccitel{\startnarcite[left]\setupindenting[first,yes,\dimexpr\parindent-\repshift]\startlinenumbering[repcitel]«}
\define
to interlinespace?
one cannot define a measure globally this way, since an ex is font
dependent,;
\def\amstexex{\dimexpr.08\lineheight\relax}
The latex package amsgen.sty define it more carefully
\newdimen\ex@
[EMAIL PROTECTED]@[EMAIL PROTECTED]@[EMAIL PROTECTED]
[EMAIL PROTECTED]@{%
\begingroup
:0.2:0.4,
%0.4:0.1:0.2,
%0.2:0.05:0.1]
% A macro that generates three shades above and below the given color.
% It is assumed here that the RGB values are also passed along with
% the color name.
\define[4]\generateColorGroup{
\definecolorgroup
[#1]
[#2:#3:#4]
%\dimexpr#2/4:#3
[section]
[after={\strut\blank[-2*line,samepage,disable]},
command=\SectionCommand,
distance=0pt]
\define[2]\SectionCommand{\inleft{XX}}
That was fine until it ran into \setupwhitespace with a non-zero value.
Fiddling with the after key \blank does not appear to help.
\define
to interlinespace?
one cannot define a measure globally this way, since an ex is font
dependent,;
\def\amstexex{\dimexpr.08\lineheight\relax}
or so may be better
\def\dotsadjustbox#1%
{\vbox to -1.4\amstexex{\kern-2\amstexex
\hbox{\the\textfont\zerocount#1}\vss}}
\def\dddot#1%
{{\mathop{#1
{
\blank % just because I always need some vertical space just before my
Section
\inleft{\bfa #1}
{\line{\leaders\hbox{\vrule width 1pt height .5\strutht depth
-\dimexpr.5\strutht-\linewidth\relax} \hfil}}
\blank[-1*big] % Are you kidding me with that negative blank???
}
\define[4
header]
[width=\paperwidth, height=\paperheight]
\define[2]\setheader{%
\resetlayer[header]%
\setlayer[header]%
[preset=lefttop, x=10mm, y=5mm, width=15cm, heigth=40pt]%
{#2}%
}
\define[2]\setsubtitle{%
\setlayer[header]%
[preset=lefttop, x=10mm, y=\dimexpr(5mm+40pt), width=15cm,
Thanks Wolfgang,
but I got following error:
define font | font with name hlcrim is not found
math virtual | loading font lucidamath subfont 2 with name hlcrim at 458752
is skipped, not found
define font | font with name hlcry is not found
math virtual | loading font lucidamath subfont 3 with name
23.04.2009 um 11:51 schrieb Lutz Haseloff:
Thanks Wolfgang,
but I got following error:
define font | font with name hlcrim is not found
math virtual | loading font lucidamath subfont 2 with name hlcrim at
458752 is skipped, not found
define font | font with name hlcry is not found
math virtual
ter Two. I assume I would set up a third definition called
\SectionListCommand. Sections will have different labels too - one will
be called 'Context', the other 'Reflection'.
\define[3]\TitleListCommand
{\hbox\bgroup
\hbox to 3cm{\currentlistsymbol\hss}% number + labeltext
\vtop\bgr
?
As long as you can garantee, that your variables are declared *before*
they are read, things are ok. But an environment or extra file is IMO
the cleanest way.
Reading an undefined variable results in the \empty token. This can be
problematic, if you expect a number; e.g.
\dimexpr\getvariable{foo
On 9/17/2013 8:57 PM, Lars Huttar wrote:
Can you point me to documentation on the constraints that define what
kind of interlinespace is sane?
the default is 2.8ex which is pretty safe, then there is the ht/dp ratio
which in some cases has to be adapted to fonts esp when they are
non
currentpicture to p ;
\stopuniqueMPgraphic
\defineoverlay[titled][\uniqueMPgraphic{titled}]
\define[2]\ChapterCommand
{\setbox\scratchbox\hbox to \leftmarginwidth{#1\hss}%
\hskip-\dimexpr\leftmarginwidth+\leftmargindistance\relax
\framed
[background=titled,frame=off,offset=0pt]
{\box
narrow blocks, which is not my use case).
\showmakeup[glue]
\setupindenting[yes,2em]
\edef\ward{\cldloadfile{ward}}
\setupalign[verystrict,hz]
\starttext
\dorecurse{100}{
\hsize\dimexpr\textwidth-#1mm\relax
\dimen0=\hsize
\advance\dimen0 by -8em % 3*em - 2em
\parfillskip
t; \startitem Fourth \stopitem
> \stopitemize
>
> \stoptext
>
>
> or add a invisible symbol with increased height/depth at the begin of each
> item, e.g.
>
> \define\HorizontalItem
> {\phantombox[height=\strutht,depth=\dimexpr\strutdp+\lineheight\relax]}
>
>
v)
I just need a way to transfer this option through \footnote: I used a global
definition that I redefine where I need it:
\def\FNVOffset{0} % vertical shift of footnotes in negative lines
% this is unclean, but works quite well
\define\PlaceFootnote%
{\inmargin[voffset=\dimexpr-\FNVOffset\
]
\edef\ward{\cldloadfile{ward}}
\setupalign[verystrict,hz]
\starttext
\dorecurse{100}{
\hsize\dimexpr\textwidth-#1mm\relax
\dimen0=\hsize
\advance\dimen0 by -8em % 3*em - 2em
\parfillskip 2em plus \dimen0\relax
\ward \par
\parfillskip 2em plus \dimen0\relax
progress.
For the record, below is a transcript of what I adapted from Wolfgang's
solution, but maybe nowadays one could also right a more readable lua code to
achieve the same.
Best regards: Otared K.
\define\thinrulesfillpage%
{
\hphantom{Answer} % this is necessary, I don't
,
frame=off,
offset=overlay,
strut=yes,
]{#1}%
}%
}
\define\PlaceFootnote{%
\inmargin[
voffset=\dimexpr-\FNVOffset\lineheight\relax,
width=\ColWidth,
]{%
\vtop{\switchtobodyfont[6pt]\placelocalnotes[footnote][before=,after=]}}%
}
\def\FNo#1{{#1~}} %\crlf\gobblespacetokens
,
strut=yes,
]{#1}%
}%
}
\define\PlaceFootnote{%
\inmargin[
voffset=\dimexpr-\FNVOffset\lineheight\relax,
% width=\ColWidth,
]{%
\vtop{\placelocalnotes[footnote][before=,after
frame everywhere else:
\startuseMPgraphic{table:frame:Lrtb} % left border is double
draw leftboundary OverlayBox enlarged \the\dimexpr\linewidth*1\relax ; %
outer frame
draw leftboundary OverlayBox enlarged -\the\dimexpr\linewidth*2\relax ;
% inner frame
draw rightboundary OverlayBox enlarged
HI All,
I remember seeing some seeing what I want to do but I can not find it.
I would like to define a command that takes an optional key-valued list and
1 or 2 manditory ones.
Something like
\unexanded\def\MyCommand[#1]#2%
{%
\NassiGroupFrame[#1]{#2}%
}%
or
\unexanded\def\MyCommand[#1]#2
:
%
\define[1]\TitleTocEntry{%
#1\hskip 1cm% title
\structurelistuservariable{author}%
}
\setuplist[title][textstyle=bold,
textcommand=\TitleTocEntry,
]
%---
/Question 1:/ /How to get the two author names to line up vertically./
Given that I have both
the definition below) and section authors (given its definition
below), I could solve this problem, but everything I have tried does not
seem to work. Wolfgang had given me the ChapterListCommand definition,
and I think Hraban the SectionTocentry:
(1) CHAPTERLISTCOMMAND
\define[3]\ChapterListCommand
1 - 100 of 115 matches
Mail list logo
